|

Convert Density

Enter a density value, choose the unit it is in and the unit you want, then press the button. The tool converts between seven density units, shows the same density in every unit, and gives its specific gravity.

Specific gravity to density

Enter a specific gravity to find the density it stands for. Water has a specific gravity of 1.

Density to specific gravity

Enter a density in kg/m³ to find its specific gravity against water.

Weight from volume

Enter a volume and a density to find how much that volume weighs.

Display rounding: kg/m³ to 2 places, g/cm³ and g/mL to 4 places, lb/ft³ to 2 places, lb/in³ to 6 places, lb/gal and oz/gal to 3 places, specific gravity to 3 places, weights to 2 places. All conversions run in your browser. Nothing is uploaded.

Density is mass divided by volume: a density of 1000 kg/m³ means one cubic metre of the material has a mass of 1000 kilograms. This tool converts density between kg/m³, g/cm³, g/mL, lb/ft³, lb/in³, lb/gal and oz/gal, turns specific gravity into density and back, and works out how much any volume weighs at a given density.

How do I use the Convert Density tool?

The tool has four parts, all on the same page. The first part converts a density value between units. Enter the value, choose the unit it is in, choose the unit you want, and press “Convert density”. Two labelled boxes appear: the converted density and the specific gravity. Under them, a table shows the same density in all seven units, so the next form, data sheet or regulation that uses a different unit is already answered. A note under the table shows the working: the value converted into kg/m³ first, then out into the unit requested.

The second part turns a specific gravity into a density. Enter the specific gravity — water is 1 — and press the button. The tool shows the density in kg/m³ and in g/cm³. The third part goes the other way: enter a density in kg/m³ and the tool gives its specific gravity against water.

The fourth part works out weight from volume. Enter a volume, choose its unit (litres, cubic metres, US gallons or cubic feet), enter the density in kg/m³, and press the button. Two boxes show the weight in kilograms and in pounds. This is the part to use when the question is really “how much does this much of that stuff weigh”, such as 100 litres of water or half a cubic metre of concrete.

If an input is wrong, the tool shows a plain-language error and no results. A blank box is rejected with a message naming the box. A negative density, a negative specific gravity or a negative volume is refused, because none of those is a measurement. Zero is accepted: a density of 0 converts to 0 in every unit, and a volume of 0 weighs 0. Choosing the same unit in both lists is allowed and returns the value unchanged, with the full table underneath.

Designed illustration of a density column: a tall glass on a deep navy background holding four stacked liquid layers in gold, crimson, amber and teal, with small spheres floating at different heights, titled Convert Density.

What does a worked example look like?

Start with water, the reference everything else is measured against. Enter 1000, from kilograms per cubic metre, to grams per cubic centimetre. The tool returns 1 g/cm³. The full table adds the rest: 1 g/mL, 62.43 lb/ft³, 0.036127 lb/in³, 8.345 lb/gal and 133.526 oz/gal, and the specific gravity box shows 1. The note shows the working: 1000 kg/m³ is already in kg/m³, then divided by 1000 to reach 1 g/cm³. This is the anchor conversion to remember: water at 4 °C is 1000 kg/m³, which is exactly 1 g/cm³.

A second example uses steel. Enter 7.85, from grams per cubic centimetre, to kilograms per cubic metre. The tool returns 7850 kg/m³. The table shows 490.06 lb/ft³, 0.283599 lb/in³ and 65.511 lb/gal, and the specific gravity is 7.85. The working is 7.85 × 1000 = 7850 kg/m³, then 7850 ÷ 16.0185 = 490.06 lb/ft³. Steel is about eight times denser than water, so a steel block the size of a water bottle weighs about eight times as much.

A third example starts from the imperial side. Enter 62.43, from pounds per cubic foot, to kilograms per cubic metre. The tool returns 1000.03 kg/m³ — the 0.03 is rounding in the 62.43 figure itself, because 62.43 lb/ft³ is water rounded to two places. The table shows 1 g/cm³ and 8.346 lb/gal, and the specific gravity is 1. The working is 62.43 × 16.0185 = 1000.03 kg/m³.

A fourth example uses specific gravity. Enter 0.85, the specific gravity of a typical oil, in the specific-gravity part. The tool returns 850 kg/m³ and 0.85 g/cm³. The table for that density shows 53.06 lb/ft³. Put the same 850 kg/m³ into the weight part with 100 litres, and the tool returns 85 kg and 187.39 lb. The working is 100 litres = 0.1 m³, and 0.1 × 850 = 85 kg.

A fifth example answers the most-searched weight question directly. Enter 100 litres at 1000 kg/m³ in the weight part, and the tool returns 100 kg and 220.46 lb: one litre of water weighs one kilogram, so 100 litres weigh 100 kilograms, and 100 × 2.20462 = 220.46 lb. One US gallon of water is 3.79 kg and 8.35 lb. Half a cubic metre of concrete at 2400 kg/m³ is 1200 kg and 2645.55 lb — the sort of figure that decides whether a trailer can carry a load.

What is density?

Density is the mass of a material in a given volume, written ρ = m / V, where ρ is the Greek letter rho, m is mass and V is volume. The SI unit is kilograms per cubic metre, kg/m³: the mass in kilograms of one cubic metre of the material. A litre of water has a mass of about one kilogram, and a cubic metre holds 1000 litres, so water is about 1000 kg/m³. The exact reference is water at 4 °C, where its density is at its highest, 1000 kg/m³.

Density is a property of the material, not of the object. A small steel bolt and a large steel beam have the same density, 7850 kg/m³, because the ratio of mass to volume is the same for both. What changes with size is the mass, not the density. That is why density is useful for identifying materials and for working out weights: once the density is known, any volume of the material gives its mass by multiplication, and any mass gives its volume by division.

Density changes with temperature and, for gases, with pressure. Water at 20 °C is 998.2 kg/m³, a little less than the 1000 kg/m³ at 4 °C, because warm water expands. Air at sea level is 1.225 kg/m³ at 15 °C but 1.204 kg/m³ at 20 °C. The figures in the materials table on this page are for ordinary room conditions unless stated otherwise, and a supplier’s data sheet governs when precision matters.

How do I convert kg/m³ to g/cm³?

Divide by 1000. The factor is exact: a gram is one-thousandth of a kilogram, while a cubic centimetre is one-millionth of a cubic metre, and the two scaling factors combine to a clean ×1000. So 1000 kg/m³ is 1 g/cm³, 7850 kg/m³ is 7.85 g/cm³, and 2700 kg/m³ is 2.7 g/cm³. To go the other way, multiply by 1000: 1 g/cm³ is 1000 kg/m³.

Three units are numerically identical to g/cm³, and the tool treats them as the same size: g/mL and kg/L. One millilitre is exactly one cubic centimetre, so 1 g/mL is 1 g/cm³. One kilogram per litre is 1000 grams per 1000 cubic centimetres, which is also 1 g/cm³. Laboratory data sheets tend to quote g/cm³ or g/mL, while engineering calculations use kg/m³, so this is the conversion most readers meet most often — and it is the one where a factor-of-a-thousand slip is easiest to make. Water is the check: 1 g/cm³ and 1000 kg/m³ are the same fact twice, so if an answer does not pass through water cleanly, something is wrong.

How do I convert kg/m³ to lb/ft³, lb/gal and lb/in³?

Multiply kg/m³ by 0.062428 to get lb/ft³, or multiply lb/ft³ by 16.0185 to go back. Water is 62.43 lb/ft³, steel is 490.06 lb/ft³, and concrete is 149.83 lb/ft³. The factor comes from the exact definitions: 1 lb is 453.59237 g and 1 ft³ is 0.028316846592 m³, so 1 lb/ft³ is 16.0185 kg/m³.

For pounds per US gallon, multiply kg/m³ by 0.008345, or multiply lb/gal by 119.826 to go back. Water is 8.345 lb per US gallon, and oil at 850 kg/m³ is 7.09 lb per US gallon. Take care with the gallon: this is the US gallon of 3.785411784 litres. The imperial gallon used in the United Kingdom is 4.54609 litres, so a pound per imperial gallon is a different, larger unit, and the two must not be mixed. The tool states US gallons on every label for this reason.

For pounds per cubic inch, multiply kg/m³ by 0.000036127, or multiply lb/in³ by 27679.9 to go back. Water is 0.036127 lb/in³, steel is 0.283599 lb/in³, and concrete is 0.0867 lb/in³. This unit appears in material data sheets for small, dense parts, where a cubic foot would be an absurdly large volume to quote. For ounces per US gallon, multiply kg/m³ by 0.133526, or multiply oz/gal by 7.489 to go back: water is 133.526 oz per US gallon.

What are the conversion factors between density units?

Every factor below was used to build the tool, and every row can be checked by typing the left-hand value into the converter and reading the right-hand result.

FromToMultiply by
kg/m³g/cm³0.001 (divide by 1000)
g/cm³kg/m³1000
g/cm³g/mL1 (identical)
g/cm³kg/L1 (identical)
kg/m³lb/ft³0.062428
lb/ft³kg/m³16.0185
kg/m³lb/gal (US)0.008345
lb/gal (US)kg/m³119.826
kg/m³lb/in³0.000036127
lb/in³kg/m³27679.9
kg/m³oz/gal (US)0.133526
oz/gal (US)kg/m³7.489

Two habits keep these conversions safe. First, convert through kg/m³, as the tool does: one route into the SI unit and one route out keeps all seven units consistent with each other, instead of needing forty-two separate pairwise factors that could drift apart. Second, check the answer against water. If a conversion of water does not land near 1 g/cm³, 62.43 lb/ft³ or 8.345 lb/gal, the factor was applied the wrong way round — the most common error, because every factor has a reciprocal that looks equally plausible.

What is specific gravity, and how do I convert it to density?

Specific gravity is a density divided by the density of water, so it has no unit. Water itself has a specific gravity of 1. A material with a specific gravity of 0.85 is 85% as dense as water; a material with a specific gravity of 7.85 is 7.85 times as dense as water. Because the reference is water at 4 °C, 1000 kg/m³, the conversion is a single multiplication: density in kg/m³ equals specific gravity times 1000, and specific gravity equals density in kg/m³ divided by 1000.

Oil at a specific gravity of 0.85 is 850 kg/m³. Steel at 7.85 g/cm³ has a specific gravity of 7.85. Aluminium at 2700 kg/m³ has a specific gravity of 2.7. The same number appears in three places — g/cm³, kg/L and specific gravity are all numerically equal — which is why data sheets often quote just one of them and leave the reader to supply the rest.

Specific gravity also answers the floating question directly: anything with a specific gravity below 1 floats in water, and anything above 1 sinks. Oil at 0.85 floats. Steel at 7.85 sinks. Ice, at about 0.917, floats with about a twelfth of its volume above the surface. That is the whole of the test: no separate buoyancy calculation is needed for the yes-or-no answer.

How much does 100 litres weigh?

It depends on the density, because litres measure volume and kilograms measure mass. The formula is mass = density × volume, with the volume in cubic metres: 100 litres is 0.1 m³, so the weight in kilograms is the density in kg/m³ divided by 10.

For water at 1000 kg/m³, 100 litres weigh 100 kg, which is 220.46 lb. For oil at 850 kg/m³, 100 litres weigh 85 kg, which is 187.39 lb. For milk, at about 1030 kg/m³, 100 litres weigh about 103 kg. The same rule works in the other direction: to find the volume of a known mass, divide the mass by the density. 100 kg of water at 1000 kg/m³ occupies 0.1 m³, which is 100 litres; 100 kg of steel at 7850 kg/m³ occupies only 0.0127 m³, which is 12.7 litres.

The weight part of the tool does this arithmetic with a volume-unit choice, so the same question can be asked in litres, cubic metres, US gallons or cubic feet. One US gallon of water is 3.79 kg and 8.35 lb. One cubic foot of water is 28.32 kg and 62.43 lb — the same 62.43 as the lb/ft³ figure, because a cubic foot of water weighs 62.43 lb by definition of the unit. Half a cubic metre of concrete at 2400 kg/m³ is 1200 kg and 2645.55 lb.

What are the densities of common materials?

The table below lists reference densities at ordinary room conditions. Every g/cm³ and lb/ft³ figure was computed from the kg/m³ figure with the factors on this page, and every row can be reproduced in the converter by typing the kg/m³ value into its field. Real samples vary with temperature, purity, alloy, moisture content and porosity, so treat these as typical values rather than exact constants, and use a supplier’s figure when precision matters.

Materialkg/m³g/cm³lb/ft³Specific gravity
Air (15 °C, sea level)1.2250.0012250.080.001
Water (4 °C)1000162.431
Oil (petroleum, typical)8500.8553.060.85
Aluminium27002.7168.562.7
Concrete24002.4149.832.4
Steel78507.85490.067.85

Air sits at the bottom of the table at 1.225 kg/m³, which is why a cubic metre of air weighs only about 1.2 kg — and also why a hot-air balloon needs such a large volume to lift anything. Oil at 850 kg/m³ is lighter than water, which is why spilled oil floats. Aluminium at 2700 kg/m³ is about a third the density of steel, which is why it is used where weight matters and steel where strength matters. Concrete at 2400 kg/m³ is the figure behind the half-cubic-metre example above: 1200 kg, more than a tonne, for a volume about the size of a washing machine.

What is the density of bentonite cat litter?

Bentonite cat litter has two densities, and they differ by a factor of about three, so the number on a bag needs its basis stated. The particle density of the mineral grains themselves is 2.4–2.6 g/cm³. The loose bulk density of the poured granule bed — the mass of a loose, freely poured sample divided by the volume it occupies, including the air space between granules — is 0.75–0.90 g/cm³ for clumping sodium bentonite litter, typically near 0.80 g/cm³. Roughly two thirds of the bag is air.

The bulk figure is the working number for packaging and freight, and it converts like any other density: 0.80 g/cm³ is 800 kg/m³ and 49.94 lb/ft³. A 10-litre bag at 0.80 g/cm³ holds 8 kg, which is 17.64 lb; at 0.75 g/cm³ the same bag holds 7.5 kg, and at 0.90 g/cm³ it holds 9 kg. A supplier who quotes one density figure without saying loose or tapped, wet or dry, is offering a marketing number rather than a specification — the tapped bulk density, measured after the sample is shaken down, runs 8–15% higher than the loose figure, and the particle density is higher again.

What is a density scale?

A density scale is a scale for reading density directly, usually on a hydrometer: a weighted glass float that sinks in a liquid to a depth that depends on the liquid’s density, with a printed scale inside the stem. The scale on the stem is most often specific gravity, read where the liquid surface meets the stem. A hydrometer floating in water reads 1.000; in oil at 850 kg/m³ it reads 0.850.

Some trades use their own density scales instead of specific gravity. The oil industry uses API gravity, defined as API = (141.5 ÷ specific gravity) − 131.5. Water is 10 °API, oil at a specific gravity of 0.85 is 35.0 °API, and oil at 0.90 is 25.7 °API: lighter oils have higher API numbers, which catches people out the first time they meet it. The brewing and winemaking trades use the Baumé scale and the Brix scale, both of which are defined from specific gravity in the same way — a different numbering of the same measurement. The converter on this page works in specific gravity and density; to use an API gravity figure, convert it to specific gravity first with specific gravity = 141.5 ÷ (API + 131.5), then bring the result here.

What mistakes do people commonly make when converting density?

The first mistake is applying the factor the wrong way round: multiplying by 1000 when the conversion needs dividing, and getting a steel density of 0.00785 g/cm³ instead of 7.85. The water check catches it: if water does not come out as 1 g/cm³ and 62.43 lb/ft³, the factor went the wrong way.

The second mistake is mixing up the gallon. A pound per US gallon is 119.826 kg/m³, but a pound per imperial gallon is 99.776 kg/m³, because the imperial gallon is larger. A figure quoted in lb/gal without saying which gallon is not a complete figure. The tool uses US gallons throughout and says so on every label.

The third mistake is treating g/cm³ and g/mL as different units, or kg/L as something else again. They are the same size: 1 g/cm³ = 1 g/mL = 1 kg/L = 1000 kg/m³. Converting between them changes nothing, and a tool that returns a different number has a fault.

The fourth mistake is confusing density with bulk density, as the bentonite litter section shows. The particle density of a granule and the bulk density of a poured bed are different measurements of the same material, and using one where the other belongs gives an answer wrong by a factor of three.

The fifth mistake is using a density at the wrong temperature. Water at 20 °C is 998.2 kg/m³, not 1000, and air changes by about 0.4% per degree near room temperature. For a 100-litre weight the difference is small — 99.82 kg instead of 100 kg — but for a tank of thousands of litres it is worth using the density at the working temperature.

The sixth mistake is confusing mass with weight in the everyday sense. The weight part of this tool gives mass in kilograms and pounds, which is what scales read. On another planet the weight would differ while the mass and the density stayed the same; on Earth the distinction does not change the number.

What are the limits of this tool?

This tool converts density units, converts specific gravity in both directions, and works out weight from volume and density, using the exact factors stated on the page. It does not measure density: it cannot weigh a sample or find its volume, so the density entered must come from a data sheet, a measurement or a table. It does not correct for temperature or pressure — the density entered is used as given — so a figure measured at one temperature must be the figure for that temperature. It does not include the imperial gallon, slugs per cubic foot, tonnes per cubic metre as a separate unit, or the Baumé, Brix and API gravity scales; an API gravity figure must first be turned into specific gravity with the formula given above. It does not give advice on handling, storing or disposing of any material, and the reference densities in the table are typical values, not specifications: a supplier’s data sheet governs when precision matters.

How can I check the tool against a known result?

The simplest check uses water. Enter 1000, from kilograms per cubic metre, to grams per cubic centimetre. The tool should show 1 g/cm³, a specific gravity of 1, and a table reading 62.43 lb/ft³, 0.036127 lb/in³, 8.345 lb/gal and 133.526 oz/gal.

A second check uses steel. Enter 7.85, from grams per cubic centimetre, to kilograms per cubic metre. The tool should show 7850 kg/m³, 490.06 lb/ft³, 0.283599 lb/in³, 65.511 lb/gal and a specific gravity of 7.85.

A third check uses specific gravity. Enter 0.85 in the specific-gravity part. The tool should show 850 kg/m³ and 0.85 g/cm³. Enter 850 in the density-to-specific-gravity part and it should show 0.85 back.

A fourth check uses weight. Enter 100 litres at 1000 kg/m³ in the weight part. The tool should show 100 kg and 220.46 lb. Change the density to 850 and it should show 85 kg and 187.39 lb.

A fifth check tests the errors: enter a negative density and the tool should show the error “A density cannot be below 0.” with no results, and leave the density box blank and press the button and it should show “Please enter a density value.” with no results. The conversion factors behind the tool are the published standard factors, also listed in the density converting table on Engineering Toolbox and the density converter on CalculatorDashboard. More tools in the same collection are in the converters category.

Related tools: mass converter · unit converter · grams to mass converter · volume solver · converters category.

Frequently asked questions

How do I convert kg/m³ to g/cm³?

Divide by 1000. 1000 kg/m³ is 1 g/cm³, 7850 kg/m³ is 7.85 g/cm³, and 2700 kg/m³ is 2.7 g/cm³. To go the other way, multiply g/cm³ by 1000. Water is the check: 1 g/cm³ and 1000 kg/m³ are the same fact twice.

How do I convert g/cm³ to lb/ft³?

Multiply by 62.428. 1 g/cm³ is 62.43 lb/ft³, steel at 7.85 g/cm³ is 490.06 lb/ft³, and aluminium at 2.7 g/cm³ is 168.56 lb/ft³. To go the other way, multiply lb/ft³ by 16.0185 to get kg/m³.

What is specific gravity, and how do I convert it to density?

Specific gravity is a density divided by the density of water, 1000 kg/m³, so it has no unit. Density in kg/m³ equals specific gravity times 1000, and specific gravity equals density in kg/m³ divided by 1000. Oil at a specific gravity of 0.85 is 850 kg/m³. Anything with a specific gravity below 1 floats in water, and anything above 1 sinks.

How many pounds is 100 litres of water?

100 litres of water weigh 100 kg, which is 220.46 lb. One litre of water weighs one kilogram, so 100 litres weigh 100 kilograms, and 100 × 2.20462 = 220.46 lb. The same 100 litres of oil at 850 kg/m³ weigh 85 kg, which is 187.39 lb.

What is the density of steel in kg/m³?

Steel is 7850 kg/m³, which is 7.85 g/cm³, 490.06 lb/ft³, 0.283599 lb/in³ and 65.511 lb/gal, with a specific gravity of 7.85. The figure varies a little with alloy, from about 7750 to 8050 kg/m³, so a supplier's figure governs when precision matters.

What is the density of oil in kg/m³?

Petroleum oil is typically 820–920 kg/m³, so this page uses 850 kg/m³ as a typical middle value, which is 0.85 g/cm³, 53.06 lb/ft³ and 7.09 lb per US gallon, with a specific gravity of 0.85 and an API gravity of 35.0. Different oils differ: light crude oils are near the low end of the range and heavy fuel oils near the high end, and the exact figure belongs on the product's data sheet.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *