|

Lease Mileage Calculator

Enter the figures from your lease contract and your odometer to see whether your driving pace will take you past your mileage allowance, and what the extra miles would cost at turn-in.

The projection assumes your driving pace stays the same for the rest of the lease. The overage charge is an estimate from the per-mile rate you enter; the rate in your lease contract is the one that applies. Your entries stay in your browser.

A lease mileage calculator works out whether your driving pace will take you past the mileage allowance in your lease, and what the extra miles would cost. Enter your annual allowance, lease term, miles driven so far, months elapsed and the per-mile overage rate from your contract, and it projects your total miles at lease end, the overage miles and the charge.

How do I use the Lease Mileage Calculator?

Start with the figures in your lease contract. The annual mileage allowance is the miles-per-year figure on the contract, commonly 10,000, 12,000 or 15,000. The lease term is the full length of the lease in months, commonly 24, 36 or 39. The overage charge per mile is the per-mile rate printed in the same contract. All three come from your paperwork, not from a guess: the rate in your contract is the one that applies to you.

Then add your own driving so far. “Miles driven so far” means the miles you have driven under this lease, not the lifetime reading on the odometer. If the car had miles on it at delivery, subtract the delivery reading from the current reading. “Months elapsed so far” is the number of months from the lease start date to today. If you took delivery 24 months ago on a 36-month lease, that number is 24.

The tool returns eight figures. Total allowed miles is your full allowance for the whole term. Monthly mileage allowance is the annual figure divided by 12. Your monthly pace is miles driven so far divided by months elapsed. Projected total miles extends that pace across the full term. Overage miles is the projected total minus the total allowed, never below zero. Estimated overage charge is the overage miles multiplied by your per-mile rate. Miles remaining is the total allowed minus the miles driven so far, never below zero. Monthly pace to stay within allowance is the miles remaining divided by the months remaining, which is the monthly budget that keeps you inside the allowance from here on.

If an input is wrong, the tool shows a plain-language error and no results. A blank box is rejected with a message naming the box. An annual allowance of 0 is rejected, because a lease with no allowance cannot be measured. A term of 0 is rejected. Negative miles driven or a negative rate are rejected. Months elapsed of 0 is rejected, because with no months elapsed there is no pace to measure. Months elapsed greater than the lease term is rejected, because you cannot be further into a lease than its full length. A rate of 0 is accepted: it means the tool will show the overage miles with a charge of $0.00, which fits a lease with no per-mile charge.

Designed illustration of a lease mileage calculation: a road with milestones shows a 36-month lease at 12,000 miles per year, 25,000 miles driven in 24 months, a projected total of 37,500 miles against a 36,000-mile allowance, 1,500 miles over, and a charge of $375.00 at $0.25 per mile.

What does a worked example look like?

Take a 36-month lease with a 12,000-mile annual allowance, 25,000 miles driven after 24 months, and an overage rate of $0.25 per mile. The total allowed miles are 12,000 × 36 ÷ 12 = 36,000. The monthly mileage allowance is 12,000 ÷ 12 = 1,000 miles a month. The monthly pace is 25,000 ÷ 24 = 1,041.67 miles a month. The projected total is 1,041.67 × 36 = 37,500 miles. The overage is 37,500 − 36,000 = 1,500 miles. The estimated charge is 1,500 × $0.25 = $375.00. Miles remaining are 36,000 − 25,000 = 11,000, with 12 months left, so the monthly pace to stay inside the allowance is 11,000 ÷ 12 = 916.67 miles a month. This driver is 41.67 miles a month over the monthly allowance, and that small monthly gap grows into a $375.00 bill at turn-in.

A second example is further over. Take a 36-month lease with a 10,000-mile annual allowance, 32,000 miles driven after 30 months, and an overage rate of $0.20 per mile. The total allowed miles are 10,000 × 36 ÷ 12 = 30,000. The monthly allowance is 10,000 ÷ 12 = 833.33 miles a month. The monthly pace is 32,000 ÷ 30 = 1,066.67 miles a month. The projected total is 1,066.67 × 36 = 38,400 miles. The overage is 38,400 − 30,000 = 8,400 miles. The estimated charge is 8,400 × $0.20 = $1,680.00. Miles remaining are 0, because 32,000 miles driven is already past the 30,000-mile total allowance, with 6 months left. The monthly pace to stay within the allowance is 0 miles a month: there are no miles left to spend, so any further driving adds to the overage. The overage here is 8,400 miles on a 30,000-mile allowance, which is 28% over the total.

A third example uses a shorter, higher-mileage lease. Take a 24-month lease with a 15,000-mile annual allowance, 18,000 miles driven after 12 months, and an overage rate of $0.30 per mile. The total allowed miles are 15,000 × 24 ÷ 12 = 30,000. The monthly allowance is 15,000 ÷ 12 = 1,250 miles a month. The monthly pace is 18,000 ÷ 12 = 1,500 miles a month. The projected total is 1,500 × 24 = 36,000 miles. The overage is 36,000 − 30,000 = 6,000 miles. The estimated charge is 6,000 × $0.30 = $1,800.00. Miles remaining are 30,000 − 18,000 = 12,000, with 12 months left, so the monthly pace to stay inside the allowance is 12,000 ÷ 12 = 1,000 miles a month. This driver is 250 miles a month over the monthly allowance, and at the higher $0.30 rate that gap costs $1,800.00.

A fourth example shows the on-track case. Take a 36-month lease with a 12,000-mile annual allowance, 18,000 miles driven after 24 months, and an overage rate of $0.25 per mile. The total allowed miles are 36,000. The monthly allowance is 1,000 miles a month. The monthly pace is 18,000 ÷ 24 = 750 miles a month. The projected total is 750 × 36 = 27,000 miles. The overage is 0, because 27,000 is inside 36,000, and the estimated charge is $0.00. Miles remaining are 36,000 − 18,000 = 18,000, with 12 months left, so the monthly pace to stay inside the allowance is 18,000 ÷ 12 = 1,500 miles a month. This driver has room to drive more in the final year and still stay inside the allowance.

What is a lease mileage allowance?

A lease mileage allowance is the maximum number of miles you may drive during the lease without owing an extra charge. It is written into the lease as an annual figure — commonly 10,000, 12,000 or 15,000 miles per year — and it accumulates across the term rather than resetting each year. A 12,000-mile annual allowance on a 36-month lease is a total allowance of 36,000 miles, and a 15,000-mile allowance on the same term is 45,000 miles. The table near the end of this page lists the total allowance for each common annual figure and term.

The allowance exists because the car’s value at the end of the lease depends on how far it has been driven. The leasing company sets a residual value — the car’s expected value at turn-in — based on the expected mileage. More miles mean more wear and a lower resale value, so the per-mile overage charge is how the lessor recovers that lost value. That is why the allowance is part of the price: a higher allowance lowers the residual value and raises the monthly payment, while a lower allowance does the opposite. The Federal Reserve’s vehicle leasing FAQ explains the same link between mileage limits, residual value and monthly payments.

The allowance is a total across the whole term, not a limit checked year by year. A heavy first year followed by a light second year still gets measured against the same total at turn-in, so an early overshoot can be caught up later, and a light early period builds room for later. The figure that matters at the end is the final odometer reading against the total allowance, not the reading at any single anniversary.

The mileage allowance and the per-mile charge are terms of the contract, not marketing figures. Under the Consumer Leasing Act, the lessor must disclose the amount or the method of working out any end-of-term charges before you sign, so both numbers are in your paperwork. If the numbers on a website or in an advertisement differ from the numbers in your signed lease, the signed lease is the one that counts.

How is the overage charge worked out?

The charge follows five steps, and the tool runs all five from your five inputs. First, work out your monthly pace: miles driven so far divided by months elapsed. Second, project your total miles: your monthly pace multiplied by the full lease term. Third, work out your total allowance: the annual allowance multiplied by the lease term in months, divided by 12. Fourth, work out the overage miles: the projected total minus the total allowance, and zero if the projected total is inside the allowance. Fifth, multiply the overage miles by the per-mile rate in your contract.

Run the steps on the first worked example. The monthly pace is 25,000 ÷ 24 = 1,041.67 miles a month. The projected total is 1,041.67 × 36 = 37,500 miles. The total allowance is 12,000 × 36 ÷ 12 = 36,000 miles. The overage is 37,500 − 36,000 = 1,500 miles. The charge is 1,500 × $0.25 = $375.00. Each step uses only the numbers from the step before it, so the working can be checked by hand in under a minute.

The projection assumes your driving pace stays the same for the rest of the lease. That assumption is the honest limit of the method: a new job, a move, or a long road trip can change the pace, and the projection moves with it. Re-running the tool every few months catches a change in pace while there is still time to act on it. The fuel cost travel calculator helps put a number on the miles a planned trip would add, so a holiday drive can be checked against the remaining allowance before it happens.

One more point about the maths: the overage is charged on the total, not on each year separately. Driving 2,000 miles over the annual figure in year one and 2,000 miles under it in year two leaves no overage at all, because the total is what is measured. The reverse is also true: staying inside the annual figure every year but going over the total is not possible, because the total is the annual figure multiplied by the number of years. The annual figure is a way of stating the allowance; the total is what is enforced.

What overage rate will I pay per mile?

There is no single rate that applies to every lease. The per-mile overage charge is written into your lease contract, and that figure is the one that applies to you. The ranges below are what other sources commonly cite, so they are useful for estimating, but they are not a substitute for the number in your own paperwork.

Across the market, published rates are commonly cited between $0.10 and $0.30 per mile, most often $0.15 to $0.25. The Federal Reserve’s vehicle leasing pages say excess mileage charges typically range from 10 cents to 25 cents per mile, with the higher charges often on more expensive vehicles. Capital One’s guide to going over lease miles puts the typical range at 15 to 25 cents per mile. Brand-tier figures commonly cited are $0.15 to $0.20 per mile for mainstream brands, $0.20 to $0.25 for premium brands, and $0.25 to $0.30 for luxury brands.

The rate matters because it multiplies every extra mile. At $0.15 a mile, 5,000 miles over costs $750. At $0.20 it costs $1,000. At $0.25 it costs $1,250, and at $0.30 it costs $1,500. The same 5,000-mile overage doubles in cost between the bottom and the top of the commonly cited range, which is why the rate is worth reading in the contract before signing rather than after the car is returned. The quick-reference table near the end of this page lists the charge for five overage amounts at all four rates, so the cost of any overage can be read off at a glance.

Rates also differ between paying at the end and buying miles during the lease, which is covered in the section below on buying extra miles upfront. A rate quoted for extra miles bought mid-lease is not the same as the turn-in overage rate, and the two should be compared as separate numbers rather than assumed to match.

How do I know if I am on track?

Compare two numbers: your monthly pace against your monthly allowance. If your pace is below the monthly allowance, you are on track. If your pace is above it, the gap between the two, multiplied by the months remaining, is roughly the overage you are heading for. In the first worked example the pace is 1,041.67 miles a month against an allowance of 1,000, a gap of 41.67 miles a month, and over the 12 months remaining that gap adds about 500 miles — only a third of the 1,500-mile overage shown — because the gap has already been running for 24 months, and the overage is the gap multiplied by the full 36 months, not just the months left. The tool’s projected total is the exact figure; the pace comparison is the quick check.

A second check uses the miles remaining and the months remaining. Divide the miles remaining by the months remaining and you get the monthly budget that keeps you inside the allowance from here on. In the first example that budget is 916.67 miles a month. In the on-track example it is 1,500 miles a month. If that budget is close to your normal driving, a small change in routine is enough. If it is far below your normal driving, the overage is already large and the options in the section below are the ones to weigh.

A third check is the pro-rata target: the total allowance multiplied by the fraction of the lease that has elapsed. On a 36-month lease with a 36,000-mile allowance, the target at 24 months is 36,000 × 24 ÷ 36 = 24,000 miles. The first example’s driver is at 25,000 miles, which is 1,000 miles ahead of the target. The on-track driver is at 18,000 miles, which is 6,000 miles behind the target. The target is the same comparison as the pace check, stated as a mileage figure instead of a monthly rate.

Check the position every few months rather than once. Driving changes with seasons, jobs and family needs, and a pace that was fine in the first year can drift over the allowance in the second. Each check takes the same five numbers, and each one shows whether the gap is closing or widening. To see the overage as a share of the allowance, the percentage calculator gives the figure: the first example’s 1,500 miles over a 36,000-mile allowance is 4.17%, while the second example’s 8,400 miles over a 30,000-mile allowance is 28%.

Is it cheaper to buy extra miles upfront or pay at the end?

In most cases, buying miles before the end costs less per mile than paying the overage charge at turn-in. Extra miles bought mid-lease are commonly cited at $0.08 to $0.15 per mile, against a turn-in overage rate commonly cited at $0.15 to $0.30 per mile. The saving comes from the lessor’s side: miles bought early are priced into the lease while the car is still being used, while miles charged at return are priced as lost resale value after the fact.

Run the comparison on 5,000 extra miles. Bought mid-lease at $0.10 a mile, they cost $500. Paid at turn-in at $0.25 a mile, they cost $1,250. The difference is $750 on the same 5,000 miles. On the first worked example’s 1,500-mile overage, buying those miles at $0.10 a mile would cost $150 against the $375.00 turn-in charge, a saving of $225.00. The exact saving depends on the two rates in your own contract, so the comparison to run is your mid-lease buy rate against your turn-in rate, not one published range against another.

Buying a higher allowance at signing works the same way, with one difference: it raises the monthly payment. A higher allowance lowers the residual value, and the monthly payment rises to cover the difference. The Federal Reserve’s leasing pages note that a higher mileage limit means a higher monthly payment, and that some lessors refund the charge for extra miles bought above 15,000 miles a year if they are not driven — but only where the lease states that a refund applies. Unused miles below that level generally earn no credit and no refund: the allowance is a ceiling, not a balance that pays out.

The choice is not automatic. Buying miles only saves money if the miles are actually driven. A driver who buys 5,000 extra miles and drives 2,000 of them has paid for 3,000 miles that were never needed, unless the lease refunds them. The tool’s projection is the input to that decision: if the projected overage is small and the pace is falling, waiting costs little; if the projected overage is large and the pace is steady, buying early is usually the cheaper path.

What can I do if I am already over my mileage?

Four options exist, and the right one depends on how far over the allowance the projection puts you. The first is to drive less: use another car in the household, share lifts, or cut the trips that add miles without adding value. This works when the overage is small and months remain. In the first worked example, cutting the pace from 1,041.67 to 916.67 miles a month for the remaining 12 months removes the whole 1,500-mile overage and the $375.00 charge with it.

The second is to buy extra miles mid-lease, where the lessor offers it. Some leasing companies sell additional miles during the lease at a lower per-mile rate than the turn-in charge. Ask the lessor what rate applies and whether the miles can be bought in the amount needed, rather than in a fixed block that overshoots the projection.

The third is to buy the car at the end of the lease for its residual value. The residual value is fixed in the contract and does not change with the mileage, so buying the car removes the excess mileage charge entirely, along with any wear-and-tear charges that would have applied on a return. This is the option to weigh when the overage is large: in the second worked example the charge is $1,680.00, and if the car’s market value is close to or above the residual value, buying it can cost less than returning it and paying the charge. The loan calculator works out the monthly payment if the buyout is financed rather than paid outright.

The fourth is to trade or sell the car before the lease ends. Selling to a dealership or a third-party buyer ends the lease by buyout, so the mileage charge disappears, though the car’s market value reflects the higher mileage. The buyout figure and the market value decide whether this route saves money, and both need to be checked against the actual figures rather than assumed.

What does not work is negotiating the overage charge down at return. The charge is contractual, the rate was disclosed at signing, and leasing companies generally hold to it. The time to change the outcome is during the lease, not at the return appointment.

What happens at lease end if I return the car over mileage?

The charge is due when the car is handed back. The leasing company reads the odometer, compares it with the total allowance in the contract, and bills every mile over the limit at the per-mile rate. There is no grace period for being close: a return 100 miles over the limit at $0.25 a mile is a $25.00 charge, and a return 5,000 miles over at the same rate is $1,250.00. The bill is due at the return appointment and cannot be rolled into a new lease payment.

The mileage charge is separate from the other end-of-lease charges. Excess wear and tear is billed on the car’s condition, not its mileage, and a disposition fee may apply on top. The mileage charge, the wear charge and the disposition fee are three separate lines, and this calculator covers the mileage line only. An unpaid end-of-lease bill can be sent to a collection agency and reported to credit bureaus, so it is a bill to plan for rather than leave.

The simplest way to avoid a surprise is to run the numbers a few months before the end, when the options above are still open. A projection made with three months left still leaves time to buy miles, cut driving, or arrange a buyout. A projection made at the return appointment leaves no options at all.

What does this calculator not cover?

This calculator covers mileage only. It does not work out the monthly lease payment, which depends on the negotiated price, the residual value and the money factor rather than on mileage. It does not cover wear-and-tear charges, the disposition fee, taxes, or early termination charges. To compare the cost of leasing against buying outright, the car payment interest calculator works out the interest on a purchase loan from the price, down payment and trade-in.

It also does not cover cell tower leases. A cell tower lease is a property lease in which a landowner leases land to a mobile-phone company for a tower, and a cell tower lease buyout is the sale of that rental income stream. That is a different subject from a car lease, with different figures and different rules, and this tool does not work it out.

It does not cover a lease payment schedule or a lease amortisation table either. A lease schedule lists the payments due over the term, and an amortisation table splits each payment between interest and principal. Those are payment schedules, and this tool is a mileage tool: it projects miles and prices overage, and it takes no payment figures as inputs.

Open-end and commercial leases follow different rules from the closed-end consumer leases this page describes, and the figures here should not be applied to them. The rules and ranges on this page describe the standard consumer arrangement, where the mileage allowance and the per-mile rate are fixed in the contract at signing.

How can I check the tool against a known result?

The simplest check uses the first worked example. Enter an annual allowance of 12,000, a lease term of 36 months, miles driven so far of 25,000, months elapsed of 24, and an overage rate of 0.25. The tool should show a total allowed miles of 36,000 miles, a monthly mileage allowance of 1,000.00 miles/month, a monthly pace of 1,041.67 miles/month, a projected total of 37,500 miles, overage miles of 1,500 miles, an estimated overage charge of $375.00, miles remaining of 11,000 miles, and a monthly pace to stay within allowance of 916.67 miles/month. The status should say the pace is over, with an estimated charge of $375.00 at turn-in.

A second check uses the on-track example. Enter an annual allowance of 12,000, a term of 36 months, miles driven of 18,000, months elapsed of 24, and a rate of 0.25. The tool should show a projected total of 27,000 miles, overage miles of 0 miles, an estimated overage charge of $0.00, miles remaining of 18,000 miles, and a monthly pace to stay within allowance of 1,500.00 miles/month. The status should say the pace is on track, with no overage charge projected.

A third check uses a lease at its end. Enter an annual allowance of 12,000, a term of 36 months, miles driven of 39,000, months elapsed of 36, and a rate of 0.20. The tool should show a projected total of 39,000 miles, overage miles of 3,000 miles, an estimated overage charge of $600.00, miles remaining of 0 miles, and the monthly pace to stay within allowance as “Lease term complete”. The same inputs with 34,000 miles driven should show a projected total of 34,000 miles, overage miles of 0 miles, and a charge of $0.00.

A fourth check tests the errors. Enter months elapsed of 40 on a term of 36 and the tool should show the error “The months elapsed cannot be more than the lease term.” with no results. Enter months elapsed of 0 and the tool should show the error “The months elapsed must be above 0, so the tool can work out your monthly pace.” with no results. Enter an annual allowance of 0 and the tool should show the error “The annual mileage allowance must be above 0.” with no results. Enter a negative rate and the tool should show the error “The overage charge per mile cannot be below 0.” with no results.

The method behind the tool matches the Federal Reserve’s leasing pages on mileage, which state that most leases limit mileage to often 12,000 or 15,000 miles per year, that the limit can be negotiated higher for a higher monthly payment, and that excess mileage charges typically range from 10 cents to 25 cents per mile. More tools in the same collection are in the calculators category.

What does the overage cost at each rate?

Every figure in this table was computed with the same arithmetic the tool uses: overage miles multiplied by the per-mile rate. The rates are the ones commonly cited across the top results, and the rate in your own contract is the one that applies to you.

Miles over the allowanceAt $0.15 per mileAt $0.20 per mileAt $0.25 per mileAt $0.30 per mile
1,000$150$200$250$300
2,500$375$500$625$750
5,000$750$1,000$1,250$1,500
8,000$1,200$1,600$2,000$2,400
10,000$1,500$2,000$2,500$3,000

Two patterns in the table are worth reading. First, the cost doubles between the $0.15 and $0.30 columns at every row: 5,000 miles over costs $750 at the bottom of the commonly cited range and $1,500 at the top. Second, the cost grows in direct proportion to the miles over: 10,000 miles over costs exactly ten times what 1,000 miles over costs at the same rate. There is no discount for a larger overage and no penalty beyond the rate itself — the charge is the miles multiplied by the rate, nothing more.

What is my total allowance for each common term?

Every figure in this table was computed with the same arithmetic the tool uses: the annual allowance multiplied by the lease term in months, divided by 12.

Annual allowance24 months36 months39 months48 months
10,000 miles/year20,00030,00032,50040,000
12,000 miles/year24,00036,00039,00048,000
15,000 miles/year30,00045,00048,75060,000

The 36-month column is the one most drivers will use, since 36 months is the most common lease term. The difference between the 10,000 and 15,000 rows on that term is 15,000 miles — 30,000 against 45,000 — which is the size of the decision made at signing when the allowance is chosen. A driver who covers more than 13,000 miles a year, which the U.S. Department of Transportation reported as the average for 2024, will pass a 12,000-mile allowance well before the end of a 36-month term.

This page gives general information about lease mileage and how overage charges are worked out. It is not financial advice, and it does not replace the figures in your lease contract. The allowance, the per-mile rate and the end-of-term charges that apply to you are the ones written in your own signed lease.

Frequently asked questions

What is a lease mileage calculator?

A lease mileage calculator works out whether your driving pace will take you past the mileage allowance in your lease, and what the extra miles would cost. Enter your annual allowance, lease term, miles driven so far, months elapsed and the per-mile overage rate from your contract, and it projects your total miles at lease end, the overage miles and the estimated charge. For example, a 36-month lease at 12,000 miles a year with 25,000 miles driven after 24 months projects to 37,500 miles against a 36,000-mile allowance, which is 1,500 miles over and $375.00 at $0.25 per mile.

How many miles can I drive on a lease?

Most consumer leases allow 10,000, 12,000 or 15,000 miles per year, and the annual figure multiplied by the term gives the total: 12,000 miles a year on a 36-month lease is 36,000 miles in total, and 15,000 miles a year on the same term is 45,000 miles. The allowance is a total across the whole term, not a limit checked year by year, so a heavy year can be balanced by a light one. The exact allowance is written in your lease contract.

How much does it cost to go over mileage on a lease?

The charge is the miles over your total allowance multiplied by the per-mile rate in your contract. Rates are commonly cited between $0.15 and $0.30 per mile, most often $0.15 to $0.25, and the Federal Reserve’s leasing pages say they typically range from 10 cents to 25 cents per mile. At $0.25 a mile, 5,000 miles over costs $1,250, and 1,500 miles over costs $375.00. The rate in your own contract is the one that applies.

Can I buy extra miles on a lease?

Many lessors sell additional miles during the lease, commonly cited at $0.08 to $0.15 per mile, which is below the turn-in overage rate commonly cited at $0.15 to $0.30 per mile. A higher allowance can also be negotiated at signing, though it raises the monthly payment. Buying miles only saves money if the miles are actually driven, unless the lease states that unused miles above 15,000 a year are refunded. Check your contract for whether mid-lease purchases are offered and at what rate.

What happens if I go over my lease mileage?

If you return the car over the total allowance, the leasing company bills every mile over the limit at the per-mile rate in your contract, due at the return appointment. The charge is separate from wear-and-tear charges and any disposition fee. The options before return are to drive less, buy extra miles mid-lease where offered, buy the car at its residual value, or trade or sell the car before the lease ends. Buying the car at its residual value removes the excess mileage charge entirely, because the residual value does not change with the mileage.

Do unused lease miles carry over or get refunded?

Unused miles generally earn no credit and no refund: the allowance is a ceiling, not a balance. The Federal Reserve’s leasing pages note that some lessors refund the charge for extra miles bought above 15,000 miles per year if they are not driven, but only where the lease states that a refund applies. Miles cannot be carried into a new lease. The allowance is measured as a total across the term, so miles unused in one year can be used in a later year of the same lease.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *